Nightclub Stage Lighting Bar Matrix Rotating Battery 360 Pixel Light DMX Pixel Tube Light

Basic Info

Model NO.	STTU-L50-UCS
Kind	3D Pixel Tube Light
Emitting Color	RGB
Application	Stage, Dance Effect Lights, Film and Television, Club Bar Disco
IP Rating	IP65
Certification	CE, RoHS, FCC
Product Weight(Kg)	0.6
Working Lifetime(Hour)	50000
LED Light Source	Ucs1903
Diameter	20-30mm
Color Temperature(CCT)	2700K-10000K,RGB
Input Voltage(V)	DC12V
Length	0.5meter , 1meter , 1.5meter ,2meter
LED Qty Per Piece	32PCS/PCS
Distance Between Tubes	300mm(Customized)
Model Number	SMD5050 Chip
Transport Package	Carton
Specification	26X1000mm
Trademark	Suntech
Origin	Shenzhen, China
HS Code	9405429000
Production Capacity	5000pieces/Year

Product Description

Product introduction:Product Description

360 degree pixel LED tubes for nightclub DJ projects.

Product Parameters

DJ Pixel LED tube 360 product parameters:

Model	IC	Color	LED Qty per piece	Power Consumption	Voltage	Size
STTU-L100-UCS	UCS1903	Addressable RGB	64pcs/pcs	≤23W	12V	1000mm

Pixel LED tubes product details

1. 360 degree addressable LED tube's length can be customized, the IC can be customized too, regular IC is UCS1903 from Taiwan, we can make it DMX pixel tube light as request.

2. Smart RGB color design, can generate various color effects by Madrix software online control, can be controlled by offline controllers also.

3. Waterproof and non-waterproof are both options for indoor and outdoor use.

4. 32 pixels and 64 pixels are regular type, if requested pixels quantity needed, we can supply also.

5. This DJ meteor LED tube is DC12v input, 24v input is also available.

6. Double layer PCB, long lifespan 50000 hours..

7. Double illumination design, beam angle can be as wide as 360 degree, easy to attract customer's attention.

Dimensions: (Unit:m)

Product Specificatroduct SpecificationProduct SpecificationProdct SpecificatioProduct Specification:Installation: Installation:1, This lamp should be installed by professionals. It is strictly forbidden to operate with electricity during the installation. Do not pull the cable or force the cable during the installation process. 2, The location where the lamp is installed should be free of corrosive, explosive, flammable media or dust, and the lamp should be protected from severevibration and shock. 3, The lamp can only be applied to the type of power source indicated by the lamp, otherwise it will cause damage to the lamp. For example, this type of lamp is suitable for constant voltage 24V switching power supply. The output of the switching power supply is divided into multiple channels to supply power to the lamp. Each power supply line is at least the national standard 2.5 square millimeter of multi-strand copper core wire. 4, Fixtures should be handled lightly, the installation location should be firm. Regularly check the installed lamps to ensure that the circuit is not insulated. 5, Good or the wiring is not firm. The wiring of the lamp should be firm, the power supply line connected to the lamp cannot be overloaded, and the current through the power supply line cannot exceed the current carrying capacity of the line. When connecting the cables, make sure the contact is firm, the insulation is good, and waterproof measures are taken! 6, The lamp can only be wired according to the specified wire color, otherwise it will cause damage to the lamp. For example, the line sequence of this lamp: red line: DC24V positive pole, middle line: data, side line: DC24V negative pole. If the connection cable between thelamp and the lamp is damaged, the same type and specification of wire must be used when replacing, and it needs professional operation to avoid danger.

How to connect 3D RGB digital tube light?
1. Signal wire:DC+, DAT, GND2. DC+ and GND connect to power supplier; DAT CLK and GND connect to controller3. Relative Controller: SPI controller, DMX controller 4. SPI Signal:LED pixels + LED Power Supply + LED Controller5. DMX Control:LED pixels + LED Power Supply + DMX Controller + DMX DecoderApplication of pixel 3D RGB pixel LED tube light Company ProfileOur Advantages
Introduction of Shenzhen Suntech Company LimitedShenzhen Suntech company located in Shenzhen, China, has focused on addressable led strip and facade lighting products production since 2008 in LED outdoor lighting enterprises. The company mainly specializes in providing high-quality LED facade & landscape decoration products. Experienced experts provide façade lighting project design and installation technical support. After 15 years of development experience, our engineering team has successfully developed various outdoor lighting products with different functions. SuntechLED provides ODM/OEM services to meet customers' one-step customization needs. Our products are widely used in home decoration, garden landscapes, stadiums, exhibition halls, exhibition halls, hotels, high-end office buildings, high-end clubs, etc. Products are exported to the Americas, Europe, the Middle East, and other markets.Factory overview